Automotive Gear Oils

API GL 5; MB 235.0; MAN 342 M-1; MIL-L-2105 D
PENNASOL viscosity class SAE 75W-90 gear oils are based on synthetic components and a very shear stable Vl-improver which assures the desired SAE class according to DIN 51 512 even under extreme load for a long time. Due to the excellent viscosity temperature behaviour, these products can be used all the year round in the vehicle fleet. PENNASOL MULTIGRADE HYPOID GEAR OIL GL 5 SAE 75W-90 was developed for highly loaded hypoid gear boxes and manual transmissions.
Package  : 965 L, 202 L, 60 L, 20 L, 12*1 L

 

API GL 4; MB 235.1;MAN 341 Z-1
PENNASOL viscosity class SAE 75W-90 gear oils are based on synthetic components and a very shear stable Vl-improver which assures the desired SAE class according to DIN 51 512 even under extreme load for a long time. Due to the excellent viscosity temperature behaviour, these products can be used all the year round in the vehicle fleet. PENNASOL MULTIPURPOSE GEAR OIL GL 4 SAE 75W-90 is suitable for lubricating manual transmissions, differentials and power steering gear in passenger cars and trucks.
Package  : 965 L, 202 L, 60 L, 20 L, 12*1 L

 

API GL 5; MB 235.0; ZF TE-ML 05A, 16B, 17B, 19B (80W-90); ZF TE-ML 05A, 16C, 17B, 19B (85W-90); MAN 342 M-1; MIL-L-2105 D; Volvo 97310; DAF; Renault.
Were developed to avoid seasonal gear oil changes. It can be used both in summer and in winter. The carefully balanced combination of EP additives and base oils guarantees properties such as good pressure absorption, above-average viscosity-temperature behaviour, high oxidation stability, a low pour points, good wear protection and no sludge.                                 
Package  : 965 L, 202 L, 60 L, 20 L, 12*1 L

 

API GL 4; MAN 341 Z-1; MB 235.1; ZF TE-ML 16A, 17A, 19A; ZF TE-ML 02A.
PENNASOL MULTIPURPOSE GEAR OIL GL 4 contains high quality, carefully refined base oils, blended with a balanced combination of additives. PENNASOL MULTIPURPOSE GEAR OIL GL 4 is suitable for lubricating manual transmissions, differentials and steering boxes in motor cars where manufacturers prescribe EP gear oils.
Package  : 965 L, 202 L, 60 L, 20 L, 12*1 L

 

API GL-5; MIL-L-2105 C; MIL-L- 2105 D; Volvo according Service Bulletin 175-09.
PENNASOL MULTIGRADE HYPOID GEAR OIL GL-5 for use in regular- and hypoid gears in commercial truks even under most severe conditions especially in high altitude areas. Special EP-additives control the extreme conditions in Hypoid Gear wheel sets and prevent wear effectively.
Package  : 965 L, 202 L, 60 L, 20 L.

 

 API GL 4/5
PENNASOL MULTIGRADE HYPOID GEAR OIL GL4/GL5 SAE 80W-90 has successfully been used in rear axles of passenger cars and commercial trucks even under most severe conditions. Special EP additives control the extreme conditions of the gear wheel pairings of hypoid gear and protect effectively against wear. It can be used in winter as well as in summer.
Package  : 965 L, 202 L, 60 L, 20 L.

 

API GL 5; ZF TE-ML 05C, 12C, 16E.
PENNASOL LIMITED SLIP HYPOID GEAR OIL LS SAE 90 is a product which meets the extreme requirements of limited slip differentials. The gear oil provides good lubrication and suppresses slide and slip by special limited slip additives. It protects highly offset hypoid gears efficiently under all load conditions.
Package  : 965 L, 202 L, 60 L, 20 L.

 

API CF-2; Allison C-4; Caterpillar TO-4; Komatsu KES 07.868.1; Eaton-Fuller; Dana; Euclid; Vickers M-2950-S; Tremac/TTC
PENNASOL SPECIAL GEAR OIL TO-4 is a special gear oil designed to meet the highest demands for state-of-the-art dears of tractors and building machinery. PENNASOL SPECIAL GEAR OIL TO-4 is formulated not only for use in Caterpillar power shift transmissions, but also in other gears, such as motorised wheel drives, final drives, drive trains, wet brakes and clutches. Suitable for all caterpillar units in which high shearing forces, friction and pressure values occur.
Package  : 965 L, 202 L, 60 L, 20 L.